Lift System
Alliance Bus Parts. 8:00am - 6:00pm EST, Mon - Fri. First of all, we must identify the system Viking used, here is the Goshen lift system re-cable instructions. Replacing a cable on a GOSHEN lift system. How to play windows games on mac without bootcamp. The Goshen lift system consist of a master tube, four springs which run from the master tube to the four corners, and a single cable which runs from the winch through the maser tube to a pulley. Search and apply for the latest Manual operator jobs in Goshen, IN. Verified employers. Competitive salary. Full-time, temporary, and part-time jobs. Job email alerts. Free, fast and easy way find a job of 1.630.000+ postings in Goshen, IN and other big cities in USA. Since 1976, Goshen Stamping has made the most popular lift system for pop-up tent campers in the industry. This system is easy to install, easy to maintain and easy to repair if necessary. Only one cable is used to operate the spring push system. This system can be operated with a hand crank winch or an approved motorized winch.
Since 1976, Goshen Stamping has made the most popular lift system for pop-up tent campers in the industry. This system is easy to install, easy to maintain and easy to repair if necessary. Only one cable is used to operate the spring push system. This system can be operated with a hand crank winch or an approved motorized winch. Hollow knight dream boss locations.
PARTS
Replacement parts for our lift system may be ordered direct from us for pop-up campers made by: http://remzjc.xtgem.com/Blog/__xtblog_entry/19088116-mac-cleaner-pro-1-5-plus#xt_blog.
- Camplite/Damon (since 1993)
- Dutchmen (1993-2003)
- Forest River (since 1993)
- Palomino (since 1987)
- Rockwood/Flagstaff (some models since 1994)
- Skamper (since 1977)
- Starcraft (1993-2008)
- Sunlite (1987-1994)
- Sylvan Sport (since 2008)
- Van American/Cobra 1989-1990
- Viking (since 1995)
We will need the make, model and year made to identify the correct parts. If your telescoping corner posts are square you have the 1473 Series. If they are rectangle you have the 2660 Series.
Click on the links below for more information. Nes classic list of games.
- 1473 Series Diagram-Parts List Reallifecam passwords 2019.
- 2660 Series Diagram-Parts List
- Spring and Cable Change Procedures
Contact us to order parts by phone 574.533.4108 or e-mail us.
Hi All,I am finally getting around to writing this post about how to replace your popup camper lift cable on a 1989 Skamper 240C that uses the Goshen Lift System to apply force to all four corner posts equally. Here is a list of tools and parts that I needed:
- (1) Goshen Lift system aircraft cable (comes with correct length crimps and push plates). SPEND THE $30 ON IT AND SAVE YOURSELF A LOT OF TIME!)
- Carbide Drill Bits, 1/8' to 3/16'
- Standard Ratchets and wrenches.
- (4) New #10-32 x 5/8' long, high strength bolts. I used Black Oxide Socket Head Cap Screws (SHCS) and nuts.
- #10-32 tap
- Extra length of cable, smaller diameter preferably.
Please save yourself some time and frustration and order the lift cable directly from Goshen Metal Stamping, http://www.goshenstamping.com/lift.php. This was the best $33 I have spent in a long time. First of all it was nice to actually talk to someone, place a COD order with them, and have it show up exactly when it was supposed to. It was a throw back experience to the old days of commerce. I have read other posts about people crimping there own cables but I think I saved myself a ton of time by just ordering the correct part from Goshen. First things first, DO NOT pull your old broken cable out of the camper you will use this to 'fish tape' your new cable in!
STEP 1). I started by jacking up my trailer so I could get under it. I also used the appropriate jack stands under it so I could work safely. Remove the rear push spring brackets at both rear corners of your popup. This proved very hard for me since the old bolts used the a bowtie bit to break them loose. I was only able to get one off and the other three rounded off. This was problematic because the screws were harden and my high speed steel (HSS) drill bits just couldn't drill out the screws. That's where the carbide drills came into play. The carbide drill cut through them like butter but I kept breaking them since they are brittle but I had a few extras. Here are some pictures:
| Skamper Corner Lift Bracket |
| Skamper Popup with Rear Lift Tubes/Springs Removed |
| Skamper Rear Lift Springs |
STEP 3). Use your old cable, still in your camper, to fish the new one into it. I did this by using a extra length of smaller diameter cable from a broken come-along that I had saved. The cable will only go in and out of the master tube from one direction because of the two crimped stops and the push plates. First take your extra cable and electrical tape it as tight as you can to the end of the broken cable at the front (that is where mine broke). This may take a few tries but pull it through the master tube until you have the taped end at the rear of the camper. Un-tape the old cable and discard, then retape the new cable end to the extra piece of cable now in your master tube. Once that is taped tight pull the new lift cable through the master tube. It will stop at the front lift springs and won't go any more. Now fish the other end of the new cable up through the rear pulley and into the master tube. You will need to keep your rear lift springs/tubes on their correct side and you will also need to run the cable between the springs. Before I reinserted the lift springs I cleaned the old grease off of them with a few old rags. You need to make sure the lift springs are pushing the pusher plate into the top part of the master tube.
| New Lift Cable Taped to Extra Fish Cable, Ready to Pull new Cable Through to Crank |
I did this by myself and it took me about 4-5 hours. It helps to have some extra hands but it gave me the time to analyse my moves and not break anything. I should have taken more pictures but its hard when your hands are all greasy and you are tired. I hope this helps.
| New Lift Cable Installed. |
Goshen Lift Repair
Here is a link to the PDF of the Goshen Lift System for my camper.
Goshen Lift System Parts
http://www.goshenstamping.com/pdf/1473_SERIES_DIAGRAM-PARTS_LIST.pdf